Welcome to the N1IR Electronics Website. Totally off the cuff, one take, unrehearsed video projects for anyone interested in amateur radio, electronic design, makers, hardware hackers and science.


Get off you duff and build something!
Training the hand and mind since 1982.

Wednesday, August 20, 2014

I've got the Power!! cue music from SNAP.


Testing out a new power inverter, 2.5 KW / 5KW peak. Some notes on this set-up I used a single group 24 Marine Battery.  I got this set-up to power my furnace in-case of power outage, they are frequent in my neighbourhood (old lines) and for quiet operation a night, I have neighbours close by and didn't want to start a generator in the middle of the night, plus I have a couple of solar panels to charge the batts so a gen-set might not be needed.

Couple of things I found out:

1. Furnace draws 8 amps after startup, this pulls a whopping 90 amps at 12VDC!
2. This set-up did work but low volatge alarm goes off constantly 11VDC under load
3. 90 amp draw battery will only last about 45 min (about 3 heat cycles)
4. good enough for one night but would need 4 hours of solar to charge

What I learned
1. Scotty we, NEED MORE POWER


2. Plan on adding second group 24 Marine Battery
3. Use 0 AWG or better not four 10 AWG in parallel like in test set-up
4. More Solar!